Hyundai Accent: Line Pressure Control Solenoid Valve. Specifications
Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Line Pressure Control Solenoid Valve. Specifications
Specifications
Direct control VFS[LINE Pressure]
▷ Control type : Normal high type
|
Control Pressure kpa (kgf/cm², psi) |
500.14 ~ 9.81 (5.4 ~ 0.1, 7.68 ~ 1.42) |
|
Current value(mA) |
50 ~ 850 |
|
Internal resistance(Ω) |
5.1 |
Line Pressure Control Solenoid Valve. Description and Operation
Description
line pressure control solenoid valve is attached to the valve body. This
variable force solenoid valve directly controls the hydraulic pressure inside
the line pressure.
...
Line Pressure Control Solenoid Valve. Schematic Diagrams
Circuit Diagram
...
See also:
Description and Operation
Description
Ignition timing is controlled by the electronic control ignition
timing system. The standard reference ignition timing data for the engine operating
conditions are pre-programmed ...
Installation
1.
Install the fog lamp.
2.
Reconnect the fog lamp connector.
3.
Connect the negative (-) battery terminal.
...
Fuel Filter. Repair procedures
Replacement
1.
Remove the fuel pump (Refer to “Fuel Pump” in this
group).
2.
Disconnect the electric pump wiring connector (A)
an ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com