Hyundai Accent Manuals

Hyundai Accent: Instrument Cluster. Description 
and Operation - Indicators And Gauges - Body Electrical SystemHyundai Accent: Instrument Cluster. Description and Operation

Description

Function
Tail lamp warning buzzer
-
This function dose not operate if the vehicle equipped BCM.
-
With the tail lamp switched ON, if the ignition Is switched OFF and the driver’s door opened, the tail lamp warning buzzer should be automatically turned ON.
-
The tail lamp warning buzzer built in the instrument cluster.

Input/Output Specification
...

Instrument Cluster. Repair procedures
...

See also:

35R Clutch Control Solenoid Valve(35R/C_VFS). Specifications
Specifications Direct control VFS[35R/C] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.5 ~ 0.1, 7.82 ~ 1.42 ...

Filter replacement
1. Open the glove box and remove the support strap (1). 2. With the glove box open, remove the stoppers by turning them counterclockwise on both sides. 3. Remove the climate control air filt ...

Inspection
1. Disconnect the back up lamp switch connector (A). 2. Check the continuity between no. 1 and 2 terminals of backup lamp switch. W ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com