Hyundai Accent: Restraint (Depowered)

Reassembly

1. After spreading grease on the rack bar gear part (A), install rack bar (B) in the direction of the arrow. ...

General Information

...

See also:

Installation
1. Install the bulb. 2. Connect the connector and install the trunk trim. ...

Inspection
TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side ...

Removal
1. Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line” in this group). 2. Remove the rear sea ...