Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraul ...
High mounted stop light bulb replacement
4 Door
1. Open the trunk lid.
2. Remove the socket by turning it counterclockwise.
3. Replace the bulb from the socket.
4. Install the socket by turning it clockwise.
5 Door
If the light is ...
Side Impact Sensor (SIS). Description and Operation
Description
The Side Impact Sensor (SIS) system consists of two front SIS which are
installed inside the Center Pillar (LH and RH). They are remote sensors that
detect acceleration due to co ...