Hyundai Accent Manuals

Hyundai Accent: Inspection - Fuel Tank Pressure Sensor 
(FTPS). Repair procedures - Engine Control System - Engine Control/Fuel SystemHyundai Accent: Inspection

1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.

Specification: Refer to "Specification"


Fuel Tank Pressure Sensor (FTPS). Repair procedures
...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the rear seat (Refer to "Seat" in BD gro ...

See also:

Manifold Absolute Pressure Sensor (MAPS). Specifications
Specification Pressure [kPa (kgf/cm², psi)] Output Voltage (V) 20.0 (0.20, 2.9) 0.79 46.7 (0.47, 6.77) 1.84 ...

Rear Wheel Alignment
When using a commercially available computerized wheel alignment equipment to inspect the rear wheel alignment, always position ...

Removal
Shift Lever Assembly Replacement 1. Remove the floor Interior console assembly. (Refer to "Interior (Console)" in BD group) ...

Hyundai Accent Manuals


В© 2011-2025 Copyright www.hamanual.com