Hyundai Accent: Inspection

Fourth generation RB (2010–present) / Hyundai Accent 2010-2019 Service Manual / Manual Transaxle System (M6CF1) / Manual Transaxle Control System / Shift Lever. Repair procedures / Inspection

1.	Check the select cable for proper operation and for damage.

2.	Check the shift cable for proper operation and for damage.

3.	Check the boots for damage.

4.	Check the boots for wear abrasion sticking, restricted movement or damage.

5.	Check for the weak or damaged spring.

Removal

Shift Lever Assembly Replacement 1. Remove the floor Interior console assembly. (Refer to "Interior (Console)" in BD group) ...

Installation

1. Installation is the reverse of removal. ...

See also:

Inspection
1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the battery and check vol ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. Rem ...

Troubleshooting
Troubleshooting Symptom Possible cause Remedy Hard steering Improper front wheel alignment Excessive turning resistance of lower ar ...

Categories

Hyundai Accent Manuals

© 2011-2019 Copyright www.hamanual.com