Hyundai Accent: Passenger Airbag (PAB) Module. Repair procedures

Passenger Airbag (PAB) Module. Components and Components Location

Components ...

Removal

1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. ...

See also:

To resume cruising speed at more than approximately 25 mph (40 km/h)
If any method other than the cruise ON/OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when the RES+ switch is ...

Replacement
Standard values, such as torques and certain adjustments, must be strictly observed in the reassembly of all parts. If removed, the following parts should always be replaced with new ones ...

Driver's and passenger's front air bag
Your vehicle is equipped with an Advanced Supplemental Restraint (Air Bag) System and lap/shoulder belts at both the driver and passenger seating positions. The indications of the system's p ...