Hyundai Accent: Projected Dimensions ( 5 Door )
Hyundai Accent RB (2010-2018) Service Manual / Body (Interior and Exterior) / Body Dimensions / Under Body. Body Repair / Projected Dimensions ( 5 Door )
|
|
|
|
|
Front side member tooling hole (Ø6.6) |
Side cover mounting hole (Ø8.6) |
Front sub frame mounting hole (Ø19) |
|
|
|
|
|
Front sub frame mounting hole (Ø22) |
Center floor side member tooling hole (Ø10) |
Center floor side member tooling hole (Ø6) |
|
|
|
|
|
Rear floor side member tooling hole (Ø8.8) |
Rear suspension mounting hole (Ø10) |
Rear suspension mounting hole (Ø10) |
|
|
|
|
|
Rear floor side member tooling hole (Ø8) |
Rear floor side member tooling hole (Ø25) |
|
Actual Measurement Dimensions ( 4Door )
Front side member tooling hole (Ø6.6)
Side cover mounting hole
(B/B’: Ø6.6/ Ø8.6)
...
Actual Measurement Dimensions ( 5Door )
Front side member tooling hole (Ø6.6)
Side cover mounting hole (Ø8.6)
Front sub frame m ...
See also:
Snow tires
If you equip your car with snow tires, they should be the same size and have
the same load capacity as the original tires. Snow tires should be installed on
all four wheels; otherwise, poor handli ...
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature sensor connector.
3.
Measure resistance between ...
Function
Keyless Entry Function
DOOR LOCK / UNLOCK are performed with remote controller.
1.
Keyless entry function is performed in a state that key in switch
is eliminated ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com