Hyundai Accent: Actual Measurement Dimensions ( 5Door )
Hyundai Accent RB (2010-2018) Service Manual / Body (Interior and Exterior) / Body Dimensions / Under Body. Body Repair / Actual Measurement Dimensions ( 5Door )
|
|
|
|
|
Front side member tooling hole (Ø6.6) |
Side cover mounting hole (Ø8.6) |
Front sub frame mounting hole (Ø19) |
|
|
|
|
|
Front sub frame mounting hole (Ø22) |
Center floor side member tooling hole (Ø10) |
Center floor side member tooling hole (Ø6) |
|
|
|
|
|
Rear floor side member tooling hole (Ø8.8) |
Rear suspension mounting hole (Ø10) |
Rear suspension mounting hole (Ø10) |
|
|
|
|
|
Rear floor side member tooling hole (Ø8) |
Rear floor side member tooling hole (Ø25) |
|
Projected Dimensions ( 5 Door )
Front side member tooling hole (Ø6.6)
Side cover mounting hole (Ø8.6)
Front sub frame m ...
Exterior
...
See also:
Good braking practices
WARNING
Whenever you leave or park your vehicle, always set the parking brake
as far as possible and fully engage the vehicle's transaxle into the P (Park)
position. If the parking brak ...
Installation
1.
Remove ignition key from the vehicle.
2.
Disconnect the negative (-) cable from battery and wait for at
least three minutes.
...
Removal
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the lower anchor bolt.
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com