Hyundai Accent: Repair procedures

Schematic Diagrams

Circuit diagram ...

Removal

1. Disconnect the negative(-) battery terminal. 2. Remove the glove box. (Refer to the BD group - "Crash pad") ...

See also:

Line Pressure Control Solenoid Valve. Specifications
Specifications Direct control VFS[LINE Pressure] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.4 ~ 0.1, 7.6 ...

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between ...

Installation
1. Installation is the reverse of removal. Use a new washer (A) whenever insta ...