Hyundai Accent: Charging System

Repair procedures

On-vehicle Inspection Spark Test 1. Disconnect the connectors (A) and then ignition coils (B). 2. Disconnect ...

Description and Operation

Description The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectif ...

See also:

Installation
1. Install the washer reservoir. Before installing the pump motor, check the f ...

Intake Air Temperature Sensor (IATS). Description and Operation
Description Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, correction o ...

Side repeater light bulb replacement
Type A 1. Remove the light assembly from the vehicle by prying the lens and pulling the assembly out. 2. Disconnect the bulb electrical connector. 3. Separate the socket and the lens parts by t ...