Hyundai Accent: Underdrive Brake Control Solenoid Valve(UD/B_VFS). Specifications
Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS). Specifications
Specifications
Direct control VFS[UD/B]
▷ Control type : Normal high type
|
Control Pressure kpa (kgf/cm², psi) |
500.14 ~ 9.81 (5.5 ~ 0.1, 7.82 ~ 1.42) |
|
Current value(mA) |
50 ~ 850 |
|
Internal resistance(Ω) |
5.1 |
Underdrive Brake Control Solenoid Valve(UD/B_VFS). Description and Operation
Description
Underdrive brake control solenoid valve(UD/B_VFS) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the underdrive ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS). Schematic Diagrams
Circuit Diagram
...
See also:
Component location
1. Driveshaft (LH)
2. Circlip
3. Circlip
4. Driveshaft (RH)
...
Impact sensing door unlock system
All doors will be automatically unlocked when the impact is delivered to impact
sensors while the ignition switch is ON. However, the doors may not be unlocked
if mechanical problems occur with th ...
Opening the hood
1.Pull the release lever to unlatch the hood. The hood should pop open slightly.
WARNING
Open the hood after turning off the engine on a flat surface, shifting
the shift lever to the P(Park) po ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com