Hyundai Accent: Valve Body. Repair procedures

Valve Body. Components and Components Location

Components Location 1. PCV adjust screw 2. Solenoid valve 3. Oil temperature sensor 4. Accumulator 5. Low & reverse brake(LR/B) pressure flow hole 6. Und ...

Removal

1. Remove the battery and the battery tray. (Refer to "Charging system" in EE group.) 2. Remove the under cover (A). ...

See also:

Replacement
Standard values, such as torques and certain adjustments, must be strictly observed in the reassembly of all parts. If removed, the following parts should always be replaced with new ones ...

Installation
Pressure Side Impact Sensor 1. Install the new pressure side impact sensor with the screws (B) then connect the pressure side impact sensor connector (A). ...

Interior A ( 4Door )
Front pillar trim mounting hole (Ø8.5) Front pillar trim mounting hole (Ø8) Cowl cross ...