Hyundai Accent: Tightening Torques
Hyundai Accent RB (2010-2018) Service Manual / Emission Control System / General Information / Specifications / Tightening Torques
|
Item |
kgf.m |
N.m |
lb-ft |
|
Positive crankcase ventilation valve installation |
0.8 ~ 1.2 |
7.8 ~ 11.8 |
5.8 ~ 8.7 |
|
Canister installation bolt/nut |
2.0 ~ 3.0 |
19.6 ~ 29.4 |
14.5 ~ 21.7 |
|
Fuel tank air filter installation bolt |
0.4 ~ 0.6 |
3.9 ~ 5.9 |
2.9 ~ 4.3 |
Specifications
Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]
...
Troubleshooting
Troubleshooting
Symptom
Suspect area
Engine will not start or struggle to start
Vapor hose damaged or disconnected
Engine strugg ...
See also:
Driver's and passenger's front air bag
Your vehicle is equipped with an Advanced Supplemental Restraint (Air Bag) System
and lap/shoulder belts at both the driver and passenger seating positions. The indications
of the system's p ...
Crankshaft Position Sensor
(CKPS). Troubleshooting
Waveform
This example shows a typical Crankshaft Position Sensor(CkPS)
and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection
and ignition timing by using ...
Rear Glass Defogger Printed Heater. Repair procedures
Inspection
Wrap tin foil around the end of the voltmeter test lead to prevent
damaging the heater line. Apply finger pressure ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com