Hyundai Accent: Variable Intake Solenoid (VIS) Valve. Repair procedures

Variable Intake Solenoid (VIS) Valve. Schematic Diagrams

Circuit Diagram (M/T) (A/T) ...

Inspection

1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve ...

See also:

Repair procedures
Component Replacement After Deployment Before doing any SRS repairs, use the GDS to check for DTCs. Refer to the Diagnostic Tr ...

Inspection
1. Check the audio remote control switch (A) for resistance between terminals in each switch position. Switch C ...

Rear Torsion Beam Axle. Repair procedures
Replacement [Disc Type] 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...