Hyundai Accent: Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
|
Control Pressure kpa (kgf/cm², psi) |
9.81 ~ 500.14 (0.1 ~ 5.5, 1.42 ~ 7.82) |
|
Current value(mA) |
50 ~ 850 |
|
Internal resistance(Ω) |
5.1 |
Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation
Description
Torque converter control solenoid valve (T/CON_VFS) is attached to the
valve body. This variable force solenoid valve directly controls the hydraulic
pressure inside the torque c ...
Torque Converter Control Solenoid Valve (T/CON_VFS). Schematic Diagrams
Circuit Diagram
...
See also:
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the engine coolant temperature sensor
con ...
Removal
Side Impact Sensor
1.
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
2.
Remove the d ...
Installation
•
Install the component with the specified
torques.
•
...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com