Hyundai Accent Manuals

Hyundai Accent: Valve Body. Components and Components Location - Hydraulic System - Automatic Transaxle SystemHyundai Accent: Valve Body. Components and Components Location

Components Location

1. PCV adjust screw
2. Solenoid valve
3. Oil temperature sensor
4. Accumulator
5. Low & reverse brake(LR/B) pressure flow hole
6. Under drive brake (UD/B) pressure flow hole

Valve Body Flow

1. To cooler
2. From cooler
3. Lubrication(rear)
4. Overdrive pressure
5. Reducing pressure (red2)
6. Reducing pressure (red1)
7. From damper pressure
8. To damper pressure
9. Lubrication(front)
10. 35R clutch pressure
11. 26 brake pressure
12. From oil pump
13. To oil pump
14. Low & Reverse pressure
15. Underdrive pressure


Valve Body. Description and Operation
Description The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pr ...

Valve Body. Repair procedures
...

See also:

Defroster
CAUTION To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window. NOTICE If ...

Digital clock
WARNING Do not adjust the clock while driving. You may lose your steering control and cause an accident that results in severe personal injury or death. Whenever the battery terminals or related ...

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between ...

Hyundai Accent Manuals


В© 2011-2025 Copyright www.hamanual.com